Product News

SANYO DENKI Develops a PV Inverter with Peak Cut Function
Industry’s leading 60 kVA power can be supplied during an outage

SANUPS P73L

May 31, 2017


SANYO DENKI CO., LTD. has developed a PV inverter SANUPS P73L that can supply power of up to 60 kVA, which is leading in the industry.*

SANUPS P73L

Features

1. Supplies power from 10 to 60 kVA during outages

This PV inverter can combine the battery power with PV-generated power to supply a maximum of 60 kVA to loads during outages.

2. Peak cut function equipped**

At nighttime, power from the grid can be stored in lithium-ion batteries, which can be used during the day together with the PV-generated power.
Power stored at night can be utilized efficiently, reducing the power costs.

Note: This product is designed for use in Japan.

* Based on our own research as of May 31, 2017 among peak cut systems in the market with capacity less than 100 kW.

** Only grid-connected isolated charging type has this function.

Specifications

Items Grid-connected isolated charging type Grid-connected isolated type
Peak cut function Yes No
System capacity 10 to 60 kW
Isolated output power 10 to 60 kVA
Nominal battery capacity 16 kWh / 25 kWh -
Isolation method PV panel - grid: High-frequency isolation transformer
Battery - grid: Transformerless
PV panel input Input operating voltage range 150 to 570 VDC
AC output Number of phases/wires 3-Phase 3-wire
Rated voltage 202 VAC
Rated frequency 50/60 Hz
Efficiency 93% or greater (At rated output with a power factor setting of 1.0)
Transfer setting to isolated operation Automatic/Manual selectable (Factory setting: manual)

Circuit diagram

Grid-connected isolated charging type

SANUPS P73L

Grid-connected isolated type

SANUPS P73L

Applications

Photovoltaic power generation systems

Release Date

June 5, 2017

Note: The information stated in this release is current as of May 31, 2017.
“ SANUPS ” is a trademark of SANYO DENKI CO.,LTD.