Product News

New AC Servo Amplifier Input Voltage DC 48 V with PROFINET Interface
Expanding "SANMOTION R" ADVANCED MODEL series lineup

SANMOTION R DC48 PROFINET

October 23, 2013


SANYO DENKI Co., Ltd. has developed a high performance servo amplifier input voltage DC 48 V type with PROFINET interface, expanding the "SANMOTION R" ADVANCED MODEL series lineup.
This amplifier is best suited for semiconductor manufacturing equipment, small-size robots, the chip mounting industry, machine tool optional shaft and transfers with low voltage specification.

SANMOTION R DC48 PROFINET

Features

Low Voltage DC 48 V

The power source inputs for the main circuits have DC 48 V, a highly safe, low voltage and low risk of electrical shock specification.

Industrial Ethernet PROFINET interface

The new amplifier’s deterministic capability makes it perfect for motion control and other sophisticated applications that have hard real-time synchronization control requirements, as well as high speed applications in the field of factory automation.

Compatible with standard Ethernet, this model is an optimum choice to replace existing PROFIBUS-based systems.

Specifications

Input power DC 48 V
Servo Amplifier capacity 40 A
General Input/Output / safety function 6 inputs,2 outputs(8 total)/ Safe Torque Off

Interface specifications

Physical layer IEC61158-2
IEEE802.3u 100BASE-TX
Data link layer IEC61158-3,-4 Type10
Application layer IEC61158-5,-6 Type10
Communication port / Connector Recommended plug: RJ45 connector (2 port) / FastConnect RJ45 plug
Baud rate 100Mbps (Full duplex)
Topology Line
Cable FastConnect cable recommended (4-core cable for high speed Ethernet)
Transmission distance 100m (between nodes)
PROFINET communication PROFINET IO
Real-time communication RT (real-time)
A real-time communication system with a cycle time of approx. 5–10 ms with standard Ethernet hardware
Operation mode Position, Velocity Mode, Torque, Homing
LED indicator Port 1/2 link, Port 1/2 active

E-Catalogs

Applications

Semiconductor manufacturing equipment, small-size robots, the chip mounting industry, machine tool optional shaft and transfers with low voltage specification

Release Date

November 5, 2013
*The information stated in this release is current as of October 23, 2013.
“ SANMOTION ” is a trademark of SANYO DENKI CO.,LTD.